Payment & Shipping Terms:
|Product Name:||New Design Polyurethane Foam Spray Machine,380V Polyurethane Foam Insulation Machine||Use:||Exterior Wall Insulation,transfer PU|
|Spec:||380V/50HZ/3-Phase Or 220V/50HZ/1-Phase||Use Place:||Waterproof Construction, Polyurethane Roofing, Walling Heat-insulated Construction|
|Gross Weight:||About 200KG||Packing Size:||1000*900*1500mm|
Compact Structure Polyurethane Spray Machine 3000W×2 Heater Power CE Assured
|The ratio of raw material||1:1|
|Viscosity range of raw material||200-1000CPS(under working temperature)|
|Max working pressure||25Mpa (200bar)|
|Max fluid temperature||80°C (176°F)|
|Drive model||Full pneumatic|
|Pipeline insulation heating power||2000W|
|Voltage (Optional)||1-ph 220V 50Hz or 3-ph 380V 50Hz|
|Pneumatic source||0.5-0.8Mpa 1m³/min (73-116psi 35 cu ft)|
|A500 mainframe||1 set|
|P2 spray gun||1 pc|
|Transfer pump||2 pcs|
|Heated hose (Standard)||15m (50ft)|
|Max hose length (Optional)||120m|
|Transfer pump hose||2 pcs|
|Air pipe||1 set|
|Spare parts and tools||1 set|
|Package size (L×W×H)||1000×900×1500cm (2.95×2.95×4.75ft)|
|Net weight/Gross weight||125kg/200kg (286 lb/430 lb)|
1. This equipment low failure rate, easy to move, easy to operate, heating faster, spraying evenly, save 10% material.
2. The flat-type booster pump has the perfect coaxial structure design, minimizing the wear of the seal ring. The two-way pressurization design minimizes the pressure fluctuation, and the spraying effect is more stable than the traditional booster pump.
3. Equipped with isocyanate anti crystallization & lubrication device, the circulating lubricating fluid can take away the leaking isocyanate or the magazine at any time, the pump shaft always infiltrates in the lubricating fluid, avoids the isocyanate crystallization.
4. The cylinder is equipped with the prevention of cryogenic icing device, so that the equipment can still work normally under low temperature condition.